A recap of the modules

ThumbnailImage Name
retroATL3: The aim of this echOmod is to get the mechanical movement of the piezos. Salvaged from a former ATL3.
elmo: The aim of this module is to achieve 20Msps, at 9bits or more.
goblin: The aim of this echOmod is to get the signal coming back from a transducer, and to deliver the signal, analogically processed, with all steps accessible to hackers.
lite.tbo: The aim of this echOmod is to get the HV Pulse done.
matty: The aim is to summarize all modules in a all-inclusive board. Fast ADC, good load of memory, good SNR.. the not-so-DIY module, as it comes already assembled with nothing to do =)
doj: Getting a motherboard: that's fitting all the modules in an easy way, with an easy access to all tracks. See this for the Kicad files.
wirephantom: Just a phantom for calibrated signals
silent: The aim of this echOmod is to simulate a raw signal that would come from the piezo and analog chain.

A recap of our retired modules

ThumbnailImage Name In Out
loftus: The aim of this module is to recycle a previous head
  • ITF-A_gnd
  • ITF-B_5v
  • ITF-N_cc_motor_pwm
  • ITF-S_3_3v
  • ITF-mET_Transducer
  • ITF-mET_Piezo
  • ITF-mET_Piezo
  • ITF-mET_Transducer
croaker: The aim of this echOmod is to receive the signal and process it, then stream it over wifi.
  • ITF-3_ENV
  • ITF-10_Poff
  • ITF-9_Pon
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-19_3.3V
  • ITF-mED-TFT-Screen
  • ITF-mED-OLED-Screen
  • ITF-mEC-WiFi-UDP-Stream
mogaba: The aim of this echOmod is to get 3.3V and 5V done.
  • ITF-mEM_Alimentation
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-19_3.3V
alt.tbo: The aim of this echOmod is to get the HV Pulse done.
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-9_Pon
  • ITF-10_Poff
  • ITF-19_3.3V
  • ITF-mET_Transducer
  • ITF-18_Raw
  • ITF-mET_SMA
  • ITF-mET_Transducer
tobo: The aim of this echOmod is to get the HV Pulse done.
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-9_Pon
  • ITF-10_Poff
  • ITF-19_3.3V
  • ITF-mET_Transducer
  • ITF-18_Raw
  • ITF-mET_SMA
  • ITF-mET_Transducer
cletus: The aim of this module is to interface the transducer and the servo, aka the physical parts, to the analog part of the modules chain. More to come with the Loftus head.
  • ITF-A_gnd
  • ITF-B_5v
  • ITF-N_cc_motor_pwm
  • ITF-S_3_3v
  • ITF-mET_Transducer
  • ITF-mET_Piezo
  • ITF-mET_Piezo
  • ITF-mET_Transducer
sleepy: The aim of this echOmod is to encase the whole modules object in a neat case, making it transportable.
  • None
  • None
retro10PV: The aim of this echOmod is to get the mechanical movement of the piezos. Salvaged from a former ATL10PV.
  • ITF-A_gnd
  • ITF-F_12V
  • ITF-N_cc_motor_pwm
  • ITF-mET_Transducer
  • Motor
  • Tri-Piezo Head
  • Motor
  • ITF-mET_Transducer
  • Tri-Piezo Head
tomtom: The aim of this echOmod is to digitalize the signal, and to control the pulser, servo, ...
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-3_ENV
  • ITF-15_GPIO21
  • ITF-16_POn3
  • ITF-16_POn3
  • ITF-17_POff3
  • ITF-14_PWM
  • Wifi
toadkiller: The aim of this echOmod is to simulate the enveloppe (or maybe soon the raw signal) that would come from the piezo and analog chain.
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-19_3.3V
  • ITF-3_ENV
  • WiFi UDP Stream
  • ITF-mED-TFT-Screen
  • ITF-9_Pon
  • ITF-10_Poff
  • ITF-14_PWM
oneeye: The module aims at making a microcontroler, for the moment the ArduinoTrinketPro, usable with the motherboard and the set of modules.
  • ITF-3_ENV
  • ITF-1_GND
  • ITF-2_VDD_5V
  • ITF-7_GAIN
  • ITF-9_Pon
  • ITF-10_Poff
  • ITF-14_PWM

results matching ""

    No results matching ""