Experiments

  • 2016-08-09: Goblin tests: Testing the goblin board with the silent emulator. (20160809a)
  • 2016-08-14: RPi: Testing the acquisition with the BeagleBone DAQ. (20160814a)
  • 2016-08-22: BBB+Probe: Images acquired from a BeagleBone black with a probe (20160822a)
  • 2016-12-17: Croaker: Testing the acquisition with the croaker module. (20161217a)
  • 2017-06-11: Croaker: Testing the acquisition with the croaker module. (20170611a)
  • 2017-07-13: Elmo: Testing the new DAQ with two ADCs. (20170713a)
  • 2017-07-15: RetroATL3 acquisition: Getting an image from the retroATL3 probe. (20170715a)
  • 2017-09-30: Alt.tbo: Testing new pulser again 1/4 (20170930a)
  • 2017-10-01: Alt.tbo: Testing new pulser again 2/4 (20171001a)
  • 2017-10-01: Alt.tbo: Testing new pulser again 3/4 (20171001b)
  • 2017-11-11: Alt.tbo: Testing new pulser again 4/4 (20171111a)
  • 2017-11-12: Probe: Testing new probe with new pulser (20171112a)
  • 2017-11-24: Impedance matching: Doing some tests for impedance matching. (20171124a)
  • 2018-01-03: Felix experiment: Testing Felix setup with previous Bomanz module. (20180103a)
  • 2018-01-15: Matty: Receiving the first matty. (20180115a)
  • 2018-02-16: Alt.tbo and Elmo: Testing alt.tbo and elmo new boards. (20180216a)
  • 2018-02-17: Alt.tbo and Elmo: Testing alt.tbo and elmo new boards for pulser issues (there is not positive and negative pulse, only goes in direction). (20180217a)
  • 2018-02-24: Matty speed tests: Testing matty s acquisition at different speed, 12Msps to 24Msps. (20180224a)
  • 2018-02-24: Matty Gain: Testing matty's fixed gain settings. (20180224b)
  • 2018-02-25: Matty and RetroATL3: Acquisition of a probe image with matty. (20180225a)
  • 2018-03-10: Matty DAQ: testing the programmation of matty DAC control for the TGC. (20180310a)
  • 2018-04-03: Voltage checks: Testing matty at different voltages. (20180403a)
  • 2018-04-03: Matty TGC test: Testing matty 's TGC, including playing with the gain DAC and pulse control. (20180403b)
  • 2018-04-03: Tomas first acq: Tomas, a user, is getting a first image from a NDT setup with a block of steel. (20180403t)
  • 2018-04-15: Test of new batch 1/2: Testing the goblin board with silent, then test of the new lite.tbo pulser with a piezo. (20180415a)
  • 2018-04-15: Test of new batch 2/2: Testing the lite.tbo, goblin and elmo boards done at the fab - on a doj v2 motherboard. (20180415r)
  • 2018-04-17: echomods vs MATTY: Comparing the performances of the modules vs the FPGA board Matty (20180417a)
  • 2018-04-30: JSON and Servo: Better file management and servo control using Matty. (20180430a)
  • 2018-05-06: SPI timing on Raspberry: Checking SPI bottlenecks on Matty (20180506a)
  • 2018-05-11: Enveloppe detection: Checking different ways to rebuild enveloppe (20180511a)
  • 2018-05-16: Matty file format: Testing to format the data for experiments to be easily reproduced (20180516a)
  • 20180620a

results matching ""

    No results matching ""