Running tests of the new modules 20180415r
Setup
Required modules
- doj as a motherboard
- elmo for acquisition
- lite.tbo as the pulser
- goblin as the analog processing board
- wirephantom as a target
- A piezo, which an be replaced by a probe](https://kelu124.gitbooks.io/echomods/content/probes/retroATL3.html), folder for details here.
Is it compatible with the probe acquisition ?
Yes! This setup can easily be used to replicate the probe image acquisition displayed in 20170715-ProbeTest.ipynb by plugging the probe BNC onto the tobo board.
Only code concerns the Raspberry Pi drivers for acquisition (see below) as well as the post processing (see the previous link). One needs to shoot more lines to rebuild the image.
Files
Setup
Acquisition
Details of the pulser pulse at 24V
Pon has to go high, Poff has to go low.
Automated list of supporting files for the experiment 20180415r
List of files
md
jupyter
python
Modules
Images of the Experiment
Setup
Setting up the 20180415r experiment
Raw images
Acquisitions with the 20180415r experiment, using new Goblin board
Acquisitions with the 20180415r experiment, using new Goblin board
Others
ToTag (category: picture).
ToTag (category: picture).