Benchmarking components

The aim of this document is to reference the different articles and papers that had precious information on the components used on their respective boards.

The different Integrated Circuits (ICs) used in these papers are listed here. In bold are the ones used in the present modules.

HV

• MCP1661 up to 32V (31) - mic3172
• LT3958 (21) -> 5V to 48V. Other include:
  • LT357 http://www.linear.com/product/LT3571
  • LT3482 is a fixed frequency current mode step-up DC/DC
• MAX5025 (11) - interesting setup -- https://www.maximintegrated.com/en/images/appnotes/1751/1751Fig01.gif
• R05-100B (2) (0) : efficient but expensive. Going to shift to something else for tobo.alt, maybe this one..
• NMT0572SC (19) up to 72V --- 24, 48 and 72V V - 14€ -- seems OK
• Interessant for tobo.alt.bis - 2.60€ ! HV9110NG AN-H59DB1 is a high voltage DC/DC converter for HV748 ;) Based on HV9110NG (30) et AN-H59 too
• MAX1771
• TPS61170 (10) Boost convertor
• 1470-1353-5-ND https://www.digikey.com/product-detail/en/xp-power/IA0524S/1470-1353-5-ND/4487734 à +-24
• LTC3813: http://cds.linear.com/docs/en/datasheet/3813fb.pdf 100V Current Mode Synchronous Step-Up Controller
• LT3032 -- +-20V output datasheet eval board
• AN-H59DB1 is a high voltage DC/DC converter

Pulsers

• LM96551 (28)
• MAX14808 (3) (9)
• TC7320 (5) + MD1810 (5)
• MD1213 + TC6320 (1)
• MD1210 + TC2320 (8)
• HV7360 (0) and/or HV7361 (27) (Application note)
• LM96550 (10) -- ultrasound Transmit Pulser, Output pulses +-50V
• TC6320 (25) (26) (21) bipolar pulse
• STHV748 Quad ± 90 V, ± 2 A, 3/5 levels, high speed ultrasound pulser Datasheet 22$.. (22) (23) and octal with STHV800
• HV732DB1 High Speed ±100V 2A - interesting pulser ( http://www.mouser.com/catalog/specsheets/HV732DB1.pdf )

Multiplexer / Switch

• LM96530 (28)
• FANTASTIC : test
• HV2901 (3) 32-output high voltage MUX chip -- differential supply of 200V. Datasheet
• TX810 (10)
• ADG1434 SPDT or ADG333A (17) for MEMS
• ADG426 (Analog multiplexer) (17) -- max entry at 44V datasheet
• AD8182 (18) 2-to-1 multiplexers
• HV748 (19) - Four-Channel, High Speed, ±75V 1.25A Ultrasound Pulser
• ADG707 (20)
• MAX4968

TGC

• AD8332 (8)
• AD8331 (0) (18) (19) (25) (26)
• SMA231 (21) as LNAs
• VCA8500 (28)

Analog enveloppe detection

• ADL5511 (0)

Analog Front end

• AFE5808 (3) (9)
• AFE5801 (10) - 8-Channel Variable-Gain Amplifier (VGA) With Octal High-Speed ADC (Rev. D)
• AFE5851 (13)
• AD9273 (15) : Octal LNA/VGA/AAF/ADC and Crosspoint Switch
• AD9272-65EBZ (16)
• AFE5818 (21) for the capsule
• AFE5804
• AD9230 (25)

ADCs

• AD9279 (5)
• ADC10040 (8) - à 20MSPS sur 10 bit
• AD9233 (14)
• ADS826 (17)
• ADS5517 (21)
• AD9467 (28)

Amplifier

• MAX4107 (18)

Beamformer

• LM96570 (4) (28)
• FDC1005-FDD15005 (18)
• AD8009 (18) : adder

FPGA / CPLD / DSP ...

• Spartan6 LX150 (3)
• CycloneII2C70F672 + TMS320C6416 (7)
• Spartan-3 (6)
• TMS320C6416 (5)
• TMS320C6455 (7)
• XC3S1500L-FG320, FPGA Xilinx (8)
• Spartan 6 LX150, Xilinx Inc. (9)
• Altera Cyclone III FPGA (10)
• XC5VSX35T “Virtex 5” FPGA + TMS320DM6446 + XC2C256 (13)
• Altera EP3C10 (14)
• Virtex-4 Xilinx FPGA + TMs320c645516)
• Virtex-4 FPGA (17)
• XCR3064XL (20)
• Cyclone IV, EP4CE115F29 (21)
• CC3200 Wifi (21)
• FPGA Stratix IV 70 GX (22)
• Cyclone-V 5CGXFC7D7F31C8N (25)

Phantom

• Model 040GSE, CIRS, USA (3)
• Model 539 Multipurpose US Phantom (5)
• Model ATS539, ATS Laboratories (9)

Thanks to the Murgen project for the basis of this work =)

Suppliers

• US-SPI (14): an interesting tool from LeCoeur electronics.
• http://dghtechnology.com/product/scanmate-a/
• http://www.ndt.net/forum/thread.php?admin=&forenID=0&msgID=54166&rootID=54166
• http://ntsu.net.au/software_controlled_ultrasonic_systems.html
• http://www.tribosonics.com/pages/products/small-ultrasonic-system.htm
• http://sci-hub.cc/10.1177/016173460803000104 has a nice picture of a interson pcb + xilinx

Probes

Kretz-Technik (eg S-VRW77AK-IPx7 )